Applications
A reaming shell sits between the core bit and the core barrel outer tube. Its diamond-set outer surface reams the hole wall back to full gauge as the bit wears, keeps the core barrel centred and stable, and protects the bit from side-wall wear. A good reaming shell means a straighter hole, longer bit life and a new bit that goes back down to the bottom without jamming.
Our reaming shells are made by pressureless impregnation with synthetic diamonds of more than 400 N strength, in 20/25 to 30/35 mesh, for steady gauge protection. ALBARIQ Drilling supplies them for wireline Q-series and metric T2/T6 core barrels, for geotechnical site investigation and exploration across the UAE, Saudi Arabia and Qatar.
Which series do I need?
- Wireline Q-series (NC, HC, PC): for NQ, HQ and PQ wireline core barrels.
- Metric T2 and T6: for metric double-tube core barrels. T2 shells run from 46 to 116 mm, and T6 shells from 76 to 146 mm.
- Size: the shell must match the bit and outer tube in the same string.
Care and matching parts
Run the shell with the matching bit, and change it when its gauge wears below the bit’s outer diameter. Combine it with an impregnated diamond core bit, a PDC core bit or, on metric barrels, a TC core bit. Add a core barrel outer tube, a head assembly and wireline drill rods.
Contact our team in the UAE, Saudi Arabia or Qatar for sizes, stock and delivery.
Specifications
| Series | Sizes | Barrel system | Process | Diamond | Mesh |
|---|---|---|---|---|---|
| Wireline Q | NC(Q), HC(Q), PC(Q) | Wireline | Pressureless impregnation | Synthetic | 20/25 – 30/35 (0.80 – 0.45 mm) |
| Metric T2 | 46, 56, 76, 86, 101, 116 mm | Metric double-tube | Pressureless impregnation | Synthetic, >400 N | 20/25 – 30/35 (0.80 – 0.45 mm) |
| Metric T6 | 76, 86, 101, 116, 131, 146 mm | Metric double-tube | Pressureless impregnation | Synthetic, >400 N | 20/25 – 30/35 (0.80 – 0.45 mm) |
Primary function, all series: hole gauge maintenance and core barrel stabilisation.



