Applications
Casing lines the top of a borehole to stop loose ground from collapsing, to seal off zones where drilling fluid would be lost, and to guide the coring string straight down. In site investigation and exploration, casing is advanced through soil and broken rock with a casing shoe, and coring then continues inside it in a smaller size.
Our W-series casing pipes are made from high-tensile steel with precision-machined, flush threads, for high torque resistance and smooth advancement. They come in NW, HW and PW sizes and in 1.5 m and 3.0 m lengths, supplied by ALBARIQ Drilling across the UAE, Saudi Arabia and Qatar.
Choosing the right casing
- Size: each W-series casing lets the same-letter Q-size core barrel pass through it. For example, HW casing takes HQ coring and NW casing takes NQ coring.
- Telescoping: in very difficult ground, a larger casing can be set first and a smaller one run inside it, so the hole can carry on in a smaller size.
- Length: 3.0 m pipes mean fewer joints, and 1.5 m pipes suit short masts and confined sites.
Matching parts
Advance the casing with our NW, HW and PW casing shoes, and protect the threads with thread grease. Inside the casing, core with matching core bits, outer tubes and wireline drill rods.
Contact our team in the UAE, Saudi Arabia or Qatar for stock and delivery.
Specifications
Geological Casing Pipe Specifications
W Series Casing
| Casing Size | Standard Lengths | Outer Diameter (OD) | Inner Diameter (ID) | Thread Length | Thread Pitch |
| NW Casing | 1.5m / 3.0m | 89.0 mm | 76.3 mm | 69.3 mm | 6.35 mm |
| HW Casing | 1.5m / 3.0m | 114.3 mm | 101.6 mm | 76.2 mm | 6.35 mm |
| PW Casing | 1.5m / 3.0m | 139.7 mm | 127.0 mm | 82.6 mm | 8.47 mm |




