Applications
Impregnated diamond core bits are the standard choice for coring medium to very hard, abrasive rock such as granite, basalt, quartzite and hard limestone. Instead of a single layer of set stones, high-grade synthetic diamonds (compressive strength above 400 N) are spread through a pressureless sintered crown matrix. As the matrix wears, fresh diamonds are exposed, so the bit keeps cutting at a steady rate for its full crown height.
ALBARIQ Drilling supplies impregnated core bits for every common coring system: wireline Q-series in NQ, HQ and PQ; triple-tube NQ3, HQ3 and PQ3 for fractured or sensitive ground; and metric T2 and T6 double-tube barrels. They are used for geotechnical site investigation, foundation testing and mineral exploration across the UAE, Saudi Arabia and Qatar.
Which series do I need?
- Wireline Q-series (NQ, HQ, PQ): the standard for wireline coring with double-tube barrels. NQ is the most common site investigation size, and HQ and PQ give larger cores for weak ground and testing.
- Triple-tube (NQ3, HQ3, PQ3): for triple-tube barrels, whose split inner tube lets the core be laid out without being pushed out of the tube. This is the norm in geotechnical site investigation where fractured, weathered or soft cores must stay intact.
- Metric T2 and T6: for metric double-tube core barrels. T2 is the thin-walled series from 46 to 116 mm. T6 has thicker walls and a wider kerf, from 76 to 146 mm, for heavier-duty coring.
Choosing matrix, crown and waterways
- Matrix hardness: the matrix is matched to the rock. Hard, fine-grained rock needs a softer matrix so new diamonds are exposed quickly; abrasive or broken rock needs a harder matrix to slow wear. Our team can recommend a grade from your borehole logs.
- Crown height: a taller crown gives more metres per bit, and a shorter crown suits trial holes and changing ground.
- Waterways: standard waterways suit most rock, while face discharge and turbo designs help keep soft or easily washed cores intact.
Matching parts
For a complete coring string, combine the bit with a matching diamond reaming shell, core barrel outer tube, head assembly, wireline drill rods and overshot. For softer formations, see our PDC core bits and TC core bits.
Contact our team in the UAE, Saudi Arabia or Qatar to choose the series, matrix and crown height for your project.
Size chart
Wireline NQ, HQ and PQ: hole, core, rod and casing
| Size | Hole diameter | Core diameter | Core, triple tube | Drill rod, outside × inside | Casing, outside × inside |
|---|---|---|---|---|---|
| NQ | 75.7 mm | 47.6 mm | NQ3: 45.1 mm | NQ: 69.9 × 60.3 mm | NW: 89.0 × 76.3 mm |
| HQ | 96.1 mm | 63.5 mm | HQ3: 61.1 mm | HQ: 89.0 × 77.8 mm | HW: 114.3 × 101.6 mm |
| PQ | 122.6 mm | 85.0 mm | PQ3: 83.1 mm | PQ: 114.3 × 101.6 mm | PW: 139.7 × 127.0 mm |
Nominal sizes. The hole diameter is set by the reaming shell. Each casing takes the core barrel with the same letter. Tell us your size and we confirm the exact item before you order.
Metric T2 and T6
| Size | Hole diameter (nominal) | Core diameter (approx.) |
|---|---|---|
| T2-46 | 46 mm | 32 mm |
| T2-56 | 56 mm | 42 mm |
| T2-66 | 66 mm | 52 mm |
| T2-76 | 76 mm | 62 mm |
| T2-86 | 86 mm | 72 mm |
| T2-101 | 101 mm | 84 mm |
| T6-76 | 76 mm | 57 mm |
| T6-86 | 86 mm | 67 mm |
| T6-101 | 101 mm | 79 mm |
| T6-116 | 116 mm | 93 mm |
| T6-131 | 131 mm | 108 mm |
| T6-146 | 146 mm | 123 mm |
Nominal sizes for double-tube barrels. Tell us your size and we confirm the exact item before you order.
Specifications
Wireline Q-series (double-tube)
| Size | Hole diameter | Bit ID | Crown height | Matrix | Waterways |
|---|---|---|---|---|---|
| NQ | 75.7 mm | 47.6 mm | 12 / 14 / 16 mm | M3 – M11 | 6 – 8 |
| HQ | 96.1 mm | 63.5 mm | 12 / 14 / 16 mm | M3 – M11 | 10 – 12 |
| PQ | 122.6 mm | 85.0 mm | 12 / 14 / 16 mm | M1 – M14 | 12 – 14 |
Triple-tube (NQ3, HQ3, PQ3)
| Size | Crown height | Matrix | Waterways |
|---|---|---|---|
| NQ3 | 12 / 14 / 16 mm | M3 – M11 | 6 – 8 |
| HQ3 | 12 / 14 / 16 mm | M3 – M11 | 8 – 10 |
| PQ3 | 12 / 14 / 16 mm | M3 – M11 | 10 – 12 |
Metric T2 and T6 (double-tube)
| Series | Sizes | Crown height | Matrix | Waterways |
|---|---|---|---|---|
| T2 | 46, 56, 66, 76, 86, 101, 116 mm | 12 mm | M3 – M11 | 6 – 12 |
| T6 | 76, 86, 101, 116, 131, 146 mm | 12 mm | M3 – M11 | 6 – 12 |
All series: high-grade synthetic diamond (compressive strength above 400 N), pressureless sintered matrix. Waterway options: standard, turbo and face discharge. Crown height and matrix can be customised.
Questions and answers
What size is an NQ, HQ or PQ core bit?
NQ gives a 75.7 mm hole and a 47.6 mm core. HQ gives a 96.1 mm hole and a 63.5 mm core, and PQ a 122.6 mm hole and an 85.0 mm core.
What is the difference between an NQ and an NQ3 bit?
An NQ3 bit is for a triple-tube barrel. The hole is the same, 75.7 mm, and the core is smaller: 45.1 mm instead of 47.6 mm. The same applies to HQ3 (61.1 mm core) and PQ3 (83.1 mm core).
Which crown height should I choose: 12, 14 or 16 mm?
A taller crown gives more metres per bit. A shorter crown suits trial holes and changing ground. Wireline bits come in 12, 14 and 16 mm, and T2 and T6 bits in 12 mm.
Which matrix do I need for my rock?
Hard, fine-grained rock needs a softer matrix, so that new diamonds are exposed quickly. Abrasive or broken rock needs a harder matrix to slow wear. Send us your borehole logs and we recommend a grade.
Is an impregnated bit the right choice for soft formations?
Usually not. Impregnated diamond bits are for medium to very hard rock. In soft to medium-hard formations a PDC core bit gives high penetration rates, and on T2 and T6 barrels a TC core bit suits soil and clay. Where the core washes away easily, face discharge or turbo waterways help keep it intact.
What do you need to quote a core bit?
The size (for example NQ3 or HQ), the crown height, the formation or your borehole logs, and the quantity.










